Home›Power & Electronics›Switch Mode Power Supply
Panel Power Supplies
Switch Mode Power Supply (SMPS) Supplier in Ahmedabad
Ahmedabad Industrial supplies switch mode power supplies (SMPS) in Ahmedabad for control panels, PLCs, sensors and automation. Tell us your voltage, current and mounting style and we will quote the right DIN-rail or enclosed unit, delivered across Gujarat.
- DIN-rail & enclosed
- 12 / 24 / 48 V DC
- Short-circuit protected
Quotes within 1 working dayHigh Efficiency Conversion
High-frequency switching means less heat, smaller size and lower running losses than linear supplies.
Built-in Protection
Short-circuit, overload, over-voltage and over-temperature protection on industrial-grade units.
Wide Input Range
Single-phase and three-phase input models to suit the supply available in your panel.
Gujarat-wide Delivery
Quick dispatch from Ahmedabad to industrial estates across Gujarat and shipping across India.
DIN-Rail SMPS for Control Panels in Ahmedabad
A switch mode power supply converts AC mains (or a DC source) into a stable, regulated DC output for your loads. In a control panel that usually means a 24 V DC rail feeding PLCs, HMIs, relays, sensors, solenoid valves and indicator lamps.
DIN-rail SMPS units clip straight onto a 35 mm rail, wire in minutes and take up very little panel space. Enclosed (box-type) and open-frame units suit OEM machines, LED signage and equipment where the supply sits inside a cabinet or chassis.
We supply units for panel builders, OEMs and maintenance teams in Ahmedabad, Sanand, Changodar, Vatva and across Gujarat, including like-for-like replacements when an existing supply fails.
Why Switch Mode Instead of a Linear Supply
An SMPS switches at a high frequency, so it can use a much smaller, lighter transformer and smaller filter components. The result is higher efficiency, less heat in the panel and a compact footprint.
Good industrial supplies also hold their output steady across a wide input range, which helps where the incoming voltage dips or fluctuates.
Efficiency
Less wasted energy as heat, so panels run cooler and fans work less.
Compact Size
Slim DIN-rail widths free up space for more terminals and devices.
Tight Regulation
Stable output voltage, often with a front trim pot for fine adjustment.
Protection
Current limiting, short-circuit and over-voltage protection guard the load and the supply.
Protection Features to Look For
Industrial SMPS units protect both themselves and the connected equipment. On overload or short circuit, many units limit current to a value a little above nominal and keep supplying it, rather than shutting down abruptly; others go into hiccup mode and restart automatically once the fault clears.
- Short-circuit and overload protection (constant-current or hiccup mode)
- Over-voltage protection on the output
- Over-temperature shutdown
- DC-OK relay or LED for remote monitoring
- Power boost or reserve for inrush loads such as solenoids and motors
How to Size a Switch Mode Power Supply
Add up the steady current of every device on the DC rail, then allow headroom of around 20 to 30 percent so the supply does not run flat out. Check for loads with high inrush current, such as relays, contactors, solenoid valves and capacitive inputs.
Consider the panel temperature too. Most supplies derate their output above a stated ambient temperature, so a hot panel may need a larger unit or better ventilation. For critical loads, use two supplies with a redundancy module or a DC UPS.
| Load on 24 V rail | Typical choice |
|---|---|
| Up to 2.5 A (PLC, few sensors) | 60 W DIN-rail SMPS |
| Up to 5 A | 120 W DIN-rail SMPS |
| Up to 10 A | 240 W DIN-rail SMPS |
| Up to 20 A | 480 W, often three-phase input |
Need help choosing?
Get the right fit, first time
Talk to our product desk
Real people, Ahmedabad office
Send us these details for an accurate quote:
- Output voltage and current (for example 24 V DC, 10 A)
- Input supply: single-phase 230 V AC or three-phase 415 V AC
- Mounting: DIN-rail, enclosed box type or open frame
- Make and model of the existing unit if you need a replacement
- Panel ambient temperature and any redundancy or DC-OK signal needs
- Quantity and delivery location in Gujarat or India
Applications
Where switch mode power supply are used
Common industries and jobs we supply for across Ahmedabad and Gujarat.
- Control panels
- PLC and HMI systems
- CNC machines
- Packaging machinery
- Building automation
- LED lighting and signage
- Instrumentation
- Solenoid valve banks
- Conveyor controls
- Telecom and networking cabinets
How it works
From enquiry to delivery in four simple steps
Share your requirement
Send a model number, a nameplate photo or describe the job by form, WhatsApp or phone.
We match the right product
We check flow, pressure, range or load and shortlist what fits, not everything in the catalogue.
Get a clear written quote
Price, GST, specs, warranty and delivery time in one place, usually within a working day.
Dispatch and support
Collect in Ahmedabad or get it delivered anywhere in Gujarat and India. We stay on call after the sale.
FAQs
Switch Mode Power Supply: your questions answered
What does a switch mode power supply do?
An SMPS converts AC mains or a DC source into a regulated DC output at the voltage your equipment needs. It uses high-frequency switching, which allows a small transformer and gives high efficiency. In industrial panels the most common output is 24 V DC for PLCs, sensors, relays and HMIs.
Are switch mode power supplies safe for industrial use?
Yes, provided you choose an industrial-grade unit and size it correctly. Good supplies include short-circuit, overload, over-voltage and over-temperature protection. On a fault they either limit current or shut down and restart, protecting both the supply and the wiring. Correct earthing and fusing on the input side are still essential.
How much spare capacity should I keep when sizing an SMPS?
A practical rule is 20 to 30 percent above your calculated steady load. Add more if you have high inrush loads like solenoids or contactors, or if the panel runs hot, because most supplies derate above a stated ambient temperature. Running a supply at 70 to 80 percent load also helps it last longer.
Should I choose single-phase or three-phase input?
Lower power units, typically up to around 240 W, are usually single-phase. For higher outputs, three-phase input units share the load across phases, run cooler and are often preferred in large panels. Choose based on what supply is available in your panel and the total power you need.
Can you supply a replacement for my existing SMPS?
Yes. Send us a clear photo of the label showing make, model, input and output ratings. We will source the same model where it is available, or suggest an equivalent with matching voltage, current, mounting and dimensions so it fits your panel without rewiring.
What is the difference between a DIN-rail and an enclosed SMPS?
A DIN-rail SMPS clips onto a standard 35 mm rail inside a control panel and is designed for easy wiring alongside other panel devices. An enclosed or box-type SMPS mounts with screws to a chassis or plate and is common in OEM machines, LED signage and CCTV setups. Electrically they do the same job.
Do you deliver SMPS units outside Ahmedabad?
Yes. We serve Ahmedabad, Gandhinagar, Sanand, Changodar, Vatva, Naroda, Odhav, Vadodara, Surat, Rajkot and the rest of Gujarat, and we ship across India. Share your delivery pin code with your enquiry and we will confirm dispatch time with the quote.
Keep exploring
Related solutions
Talk to a real person
Need the right SMPS for your panel?
Send us your voltage, current and mounting details and we will come back with a quote and delivery time.
- +91 94448 77783
- WhatsApp us
- contact@ekasynergy.com
- 78/F, Sarvoday Commercial Centre, Near G.P.O., Salapose Road, Relief Road, Gheekanta, Bhadra, Ahmedabad, Gujarat 380001